RF100 Near Field Probe Set

RF100 Near Field Probe Set

Description

The RF100 probe set consists of a passive E field probe and H field probe, BNC adaptor and carry case. The output is via a BNC socket. These are general purpose probes which are ideal for use in conjunction with an EMC measuring system. They are sensitive to sources in close proximity, but are insensitive to background signals. This makes them ideal for the identification of emission frequencies in noisy environments... thus making measurements easier and quicker. The proximity requirement also enables sources to be located and the exit route identified.

For greater sensitivity, the probes can be used in conjunction with the SA1020 pre-amplifier. A BNC-BNC adaptor (included with the kit) enables direct connection to the pre-amp.

Key Points

RF100 Near Field Probe Set is an optional extra for the following products:

Ancillaries - Radiated

RF100 Near Field Probe Set appears in the following kits:

RFG kit

Associated Downloads

Data Sheet - Information on passive probes and pre-amplifiers